26.7 Service Bypass
To facilitate system maintenance for service personnel, your
security system comes with a special point bypass option to
remove any point from service. Bypassed points are not
protected. Use this menu to view bypassed points.
Viewing points in Service Bypass:
1. Open the Main menu.
2. Use [NEXT] to go to the Actions menu option, and press
[ENTER], or simply press [3].
3. Use [NEXT] to go to the Service Bypass menu option, and
press [ENTER], or simply press [6].
4. Enter your passcode and press [ENTER]. The keypad shows
any points in service bypass.
166 en | B92x/B91x Actions menu Control Panels
2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.
To Next Page
Loading...
