8 Trouble events
8.1 Fire trouble events
When a fire trouble occurs, the keypad emits the trouble tone
(three tones followed by a pause repeated). The system shows
the number of fire points with troubles and the name for each
point in trouble.
8.1.1 Silence fire troubles
Press [ENTER] to silence the trouble tone.
After you silence the trouble, the text of the fire point in trouble
continues to show on the display. Use
/[NEXT] to scroll
through the trouble text. Events scroll from oldest to newest. You
cannot clear fire troubles from the display until the trouble
condition is cleared (the point is normal).
8.2 Gas trouble events
When a gas trouble occurs, the keypad emits the trouble tone
(three tones followed by a pause repeated). The system shows
the number of gas points with troubles and the name for each
point in trouble.
8.2.1 Silence gas troubles
Press [ENTER] to silence the trouble tone.
Control Panels Trouble events | en 27
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371
To Next Page
Loading...
