Bosch B5512 - View Log

30.3 View Log
Use the View Log function to review events stored in your
security system. Reviewing past events might help you identify
problems. Events are stored in the control panel’s memory in
order of occurrence, and tagged with the date and time.
Viewing the log:
1. Open the Main menu.
2. Use [NEXT] to go to the Events menu option, and press
[ENTER], or simply press [7].
3. Use [NEXT] to go to the View Log menu option, and press
[ENTER], or simply press [3]. The keypad shows Enter Start
Date.
To view part of the log, enter the date (MM/DD) at which you
wish to start the review. Press [ENTER].
To view the entire log from the newest event, press [ENTER]
without entering a start date. The date and time of the
newest event shows. Use [PREV] or [NEXT] to move through
the events. If an event description is longer than the display,
the event description scrolls horizontally.
4. Press [ESC] to exit the menu.
200 en | B92x/B91x Events menu Control Panels
2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.