Bosch B5512 - Glossary

Glossary
All On
To turn on (arm) both
interior points and
perimeter points.
bypass
Selectively remove
points from the security
system. A point may be
bypassed in order to
arm the perimeter with
a window open.
closing window
A duration of time
programmed by your
security company. You
security company can
program the system to
turn on at the end of
the window.
entry delay
A programmed delay of
system alarm response
allowing an individual to
enter an armed area
through the correct
point and disarm the
area. If not disarmed
before the delay time
expires, the system
begins an alarm
response which may
include reports to the
central station.
exit delay
A programmed delay of
system alarm response
allowing exit after
arming an area. Failure
to exit before the delay
time expires, causes
entry delay to begin.
The system must then
be disarmed. If not
disarmed before the
delay time expires, the
system begins an alarm
response which may
include reports to the
central station.
Control Panels Glossary | en 223
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371