28.3 Schedule (SKEDs)
A SKED is a function programmed to be performed automatically
at a scheduled time by your security system. You can change the
scheduled time for SKEDs, disable a SKED to prevent it from
automatically happening, or restart a previously disabled SKED.
Contact your security company to determine what SKEDs they
programmed for your system.
Selecting a SKED to change:
1. Open the Main menu.
2. Use [NEXT] to go to the Settings menu option, and press
[ENTER], or simply press [5].
3. Use [NEXT] to go to the Schedule menu option, and [ENTER],
or simply press [3].
4. Enter your passcode and press [ENTER].
5. Use [PREV] or [NEXT] to scroll through the list of SKEDs. The
keypad indicates whether a SKED is enabled, disabled, or not
yet programmed.
6. With the SKED you wish to enable showing, press [ENTER].
7. Continue to Enabling a disabled SKED or Disabling a enabled
SKED.
Control Panels B92x/B91x Settings menu | en 191
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371
To Next Page
Loading...
