26.3.2 Send Test Report
This function tests the communication link between your security
system and your security company. It is an important part of
maintaining a high level of security for your property.
Sending a test report:
1. Open the Main menu.
2. Use [NEXT] to go to the Actions menu option, and press
[ENTER], or simply press [3].
3. Use [NEXT] to go to the Test menu option, and press
[ENTER], or simply press [3].
4. Use [NEXT] to go to the Send Test Report menu option, and
press [ENTER], or simply press [2].
5. Enter your passcode and press [ENTER]. The system sends a
test report.
6. Press [ESC] to exit the menu
158 en | B92x/B91x Actions menu Control Panels
2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.
To Next Page
Loading...
