26.8.3 Lock Door
Use the Lock Door menu to lock an unlocked door. Also use this
menu to lock doors that were automatically opened during a fire
alarm. Once a door is locked, a user must present a card to
enter, or send an Unlock or a Cycle command from the keypad to
allow the door to open.
Locking a door:
1. Open the Main menu.
2. Use [NEXT] to go to the Actions menu option, and press
[ENTER] , or simply press [3].
3. Use the [NEXT] key to go to the Access menu option, and
press [ENTER], or simply press [8].
4. Use [NEXT] to go to the Lock menu option, and press
[ENTER], or simply press [3].
5. Enter your passcode and press [ENTER].
6. Use [PREV] or [NEXT] to scroll to the desired door. The
keypad shows the door status.
7. Press [ENTER]. The door locks.
8. Escape from the menu.
170 en | B92x/B91x Actions menu Control Panels
2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.
To Next Page
Loading...
