For instructions for using command-initiated menus, refer to the
section of this book as listed in the following table. The listed
sections explain the steps leading up to and including opening
the menu you open by using the command. Follow the
instructions as they apply to the commands.
Command Function/
menu
D1260 Series
refer to
D1255 Series
refer to
[CMD] 0 Bypass Bypass, page 66 Bypass menu, page
147
[CMD] 0 0 Unbypass
[CMD] 1 All on
(with
delay)
All On menu, page
54
All On menu, page
136
[CMD] 1 1 All On,
Instant
[CMD] 2 Part On,
Instant
Part On menu,
page 58
Part On menu,
page 140
[CMD] 3 Part On
(with
delay)
[CMD] 4 7 Reset
Sensors
Reset, page 71 Reset, page 152
Control Panels D1260/D1255 keypads | en 205
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371
To Next Page
Loading...
