16.4.2 Network Originate
Use this function to originate an RPS session using an internet
connection.
Connecting to RPS using an internet connection:
1. Open the Main menu.
2. Press [Actions] to open the menu.
3. Press [RPS] to open the menu.
4. Press [Network Originate] to open the menu.
5. To use the programmed port number, press [Configured
Port]. The connection progress begins.
6. If you wish to change the port number before connecting,
press [Change Port]. Press [ENTER]. The connection progress
begins.
Control Panels B94x/B93x Actions menu | en 81
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371
To Next Page
Loading...
