| 3
Advanced Settings Guide
Bosch Connected Control BCC100 Thermostat (01.2022)
Table of Contents
1 Thermostat Features and Functionality 4
1.1 Home Screen Settings 4
1.1.1 Heating Set Point 4
1.1.2 Cooling Set Point 4
1.1.3 Auto Heating/Cooling Set Point 5
1.2 Weather 5
1.2.1 Current Weather 5
1.2.2 Weather Next 10 Hours 6
1.2.3 Weather Next 5 Days 6
1.3 Schedule 6
1.3.1 Available Schedules 6
1.3.2 Edit Schedule 6
1.4 Device Settings 7
1.4.1 Wi-Fi Select 7
1.4.2 Wi-Fi Search 7
1.4.3 Wi-Fi On/Off 7
1.4.4 Message 7
1.4.5 Brightness 8
1.4.6 Timeout 8
1.4.7 Screen Lock 8
1.4.8 Date Format 8
1.4.9 Time Format 9
1.4.10 Account Information 9
1.4.11 System Information 9
1.5 System Settings 10
1.5.1 Fan Settings 10
1.5.1.1 Auto 10
1.5.1.2 On 10
1.5.1.3 Circulation 10
1.5.2 Humidity Control 10
1.5.3 Select Degree C or F 10
1.5.4 Low Space Temperature Monitor 11
1.5.5 High Space Temperature Monitor 11
1.5.6 Reset Heating and Cooling Runtime 11
1.5.7 Air Filter 12
1.5.8 Water Pad 12
1.5.9 System Update 12
1.5.10 Unit Confi guration 13
1.5.10.1 Compressor Confi guration 13
1.5.10.2 Auxiliary Heating 13
1.5.10.3 Humidifi er Control 14
1.5.10.4 DeHumidifi cation Control 14
1.5.10.5 Fossil Fuel Fan Control 15
1.5.10.6 Reversing Valve Energize Method 15
1.5.10.7 Balance Point 16
1.5.10.8 Changeover Delay 16
1.6 Advanced Settings 16
1.6.1 Fan On Delay in Heating 16
1.6.2 Fan On Delay in Cooling 17
1.6.3 Minimum Run Time 17
1.6.4 Anti Short Cycle (ASC) Timer 18
1.6.5 Cycle Time 18
1.6.6 Zero Energy Band 18
1.6.7 Second Stage Latching 19
1.6.8 Stage Delay 19
1.6.9 Stage Temp 20
1.6.10 Factory Reset 20
2 App Features 21
2.1 Location 21
2.2 Add Schedule 21
2.3 Device Log 22
3 Staging Logic 23
3.1 Staging Timers 23
3.2 Staging Temp 23
4 WSHP Fault Codes 23
4.1 High Pressure Alarm 23
4.2 Low Pressure Alarm 23
4.3 Condenser Coil Freeze Alarm 23
4.4 Condensate Alarm 23
4.5 Brown Out Alarm 23
4.6 Evaporator Coil Freeze Alarm 23
5 Action Codes 24
5.1 Humidity Calibration (HC) 24
5.2 Relative Humidity Hysteresis (HSD) 24
5.3 Initial Setup (IS) 24
5.4 Sensor Calibration (SC) 24
5.5 Sensitivity Level (SS) 25
5.6 Staging (ST) 25
To Next Page
Loading...
Need help?
General
