| 5
Advanced Settings Guide
Bosch Connected Control BCC100 Thermostat (01.2022)
1.1.3 Auto Heating/Cooling Set Point
This feature establishes the space temperature deadband to be maintained by
both heating and cooling operations. Within these setpoints there will be no
heating or cooling. The deadband between heating and cooling setpoints cannot be
confi gured less than 5°F.
Option: 45°F to 99°F
Cooling Default: 78°F
Heating Default: 68°F
1. Click on System Icon at left side of Home screen.
Figure 7
2. Select Auto on System Screen.
Figure 8
3. Exit System screen (press ‘x’ in top right corner).
4. On Home screen use +/- to change heating and cooling set points.
Figure 9
5. Select Heat or Cool fi eld, and use +/- to Increase/Decrease the set points.
Figure 10
1.2 Weather
This section allows the user to view the weather. To access, connect the device to
Wi-Fi, go to the menu, and select weather
1.2.1 Current Weather
This feature provides information on the current weather based on location.
A connection to Wi-Fi is required, and this information can only be
viewed if Location permission is enabled and the thermostat has been
registered.
1. Main Menu
2. Weather
3. Select Current
Figure 11
To Next Page
Loading...
Need help?
General
