Bosch BCC100 - Adjusting Temperature Setpoints; Temporary Setpoint Adjustment; Schedule Setpoint Override

34
Adjusting Temperature Setpoint(s)
Temporary Adjustment
This feature will override the current set point in favor of
the set point you enter until the next programmed time in
the schedule. If you would like to permanently schedule
the new set point, press the lock icon. This will
permanently lock in the adjustment until the X button is
pressed on the main screen.
Schedule Override on the Thermostat
You can override the current scheduled set point(s) by
tapping the plus or minus (+/-) icons on the right side of
the screen.
If you are in Auto mode, manually adjust either the
Heat/Cool set points individually by selecting the
appropriate bubble, then tapping the plus or minus (+/-)
icons. If a Heat/Cool bubble is not selected pressing the
(+/-) icons will adjust both setpoints simultaneously.
Schedule Override on the App
You can override the current schedule by scrolling the
temperature up and down with your finger.