Document number BST-BME280-HS006-00 | May 2018 Bosch Sensortec
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third
parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.
5.5. Hot-spots on the PCB
Keep a reasonable distance from any hot spots, when placing the sensor device. Hot spots can be for
example other integrated circuits with high power consumption.
5.6. PCB anchor points
Please keep a reasonable distance from any anchor points, where the PCB is fixed at a base plate (e.g.
like a shelf or similar), when placing the sensor device.
To Next Page
Loading...
