Bosch BMS-WT2 Series - Scheduling; Programming 7-day Schedule

User Manual Bosch Climate 5000 Series Wired Wall Thermostat | 15
Bosch Thermotechnology Corp. | 06.2019
Data subject to change
6.11 Scheduling
7-day schedule
― Daily schedule can be set
On timer
― Operation starts after the set time
Off timer
― Operation stops after the set time
On and Off timer
― Operation starts and stops after the set time
6.11.1 Programming 7-day Schedule
1. Press Timer to select the Week and press Confi rm.
Figure 42
Timer
Conrm
2. Press + or − to select the day of the week and then press CONFIRM.
Figure 43
-
+
Conrm
3. Press + and − to select the set time. The set time, mode, temperature and
fan speed appear on the display. Press CONFIRM to enter the setting time
process.
Figure 44
-
+
Conrm
Up to 8 scheduled events can be set on one day.
Figure 45
ex.Tuesday schedule 1
4. Press + and − to set the time then press CONFIRM.
Figure 46
-
+
Conrm
5. Press + and − to set the operation mode then press CONFIRM.
Figure 47
-
+
Conrm