Installation Instructions
Climate 5000 Series Gen 3 Wired Wall Thermostat (02.2022)
| 35
7.4 Follow Me Function (Wall Mounted Indoor Unit Only)
By default, room temperature will be measured from the sensor in indoor unit. Follow me
function can be activated in order detect room temperature from the wired wall thermostat
rather than the indoor unit for better comfort.
1. Press the FUNC. button to activate the function.
2. When the follow me function
indication appears,the room temperature is detected at
the wire controller.
Figure 35
Indoor Unit
By default, Follow me function in the wired thermostat will be turned on with 4-Way
Cassette and Ducted Indoor models.
To Next Page
Loading...
