Installation Instructions
36
|
Climate 5000 Series Gen 3 Wired Wall Thermostat (02.2022)
7.5 Child Lock
1. Press the TIMER and COPY buttons for 3 seconds to activate the child
lock function and lock all buttons on the wire controller.
2. Press again for 3 seconds to deactivate.
7.6 Key Pad Tone Setting
1. Press SWING and FUNC. simultaneously for 3 seconds to disable the key
pad tone.
2. Press both buttons again for 3 seconds to enable the key pad tone.
7.7 °F / °C Selection
1. Press or and Timer simultaneously for 3 seconds to change between °F
and °C.
7.8 Turbo Mode (HEAT/COOL modes only)
1. Press the FUNC. button to activate the TURBO function. Press the button again
to deactivate the turbo function.
To Next Page
Loading...
Need help?
General
