Bosch Condens 7000 FP - Transporting on Rollers

Transporting the boiler
Condens 7000 FP – 6721846699 (2022/12)
16
Fig. 14 Place the trolley jack underneath, push in the transport rollers
(example for illustration purposes)
[1] Trolley jack
[2] Pallet (2x)
[3] Transport rollers (2x)
Fig. 15 Boiler on the transport rollers (example for illustration
purposes)
[1] Transport rollers
[2] Transport timber
Fig. 16 Remove the transport rollers, mount the adjustable feet
(example for illustration purposes)
[1] Transport rollers
[2] Adjustable feet (4x)
Fig. 17 Remove the transport timbers (example for illustration
purposes)
4.4 Transporting the boiler on rollers
If the route to the boiler room is level, the boiler can also be rolled.
 Use at least 5 pipe sections of approx. 700 mm length (Diameter
R 1¼ ") as rollers.
 Position the pipes approx. 400 mm apart on the floor.
 Lift the floor standing boiler onto the lengths of pipe and carefully roll
it to the boiler room.
Commercially-available transport rollers can be used.
0010036081-001
4.
4.
4.
1.
3.
5.
2.
6.
6.
6.
2
1
3
0010036082-001
2
1 1
0010036084-001
1.
1
3.
3.
3.
2.
2.
2.
2.
2.
2.
2.
2.
2.
2.
2.
2.
4.
4.
4.
2
0010036083-001