Bosch CW 800 - Additional settings

6 720 820 872 (2016/12) CR 400 | CW 400 | CW 800
12 | Installation
3.6 Installation in the heat source
The installation of the user interface directly in the heat source
is for example appropriate with weather-compensated control.
When installing the user interface:
▶ Prepare user interface for installation in the heat source:
Fig. 9 Loosen the cover at the back of the user interface
Fig. 10 Remove the cover at the back of the user interface
Fig. 11 Mount installation frame at the back of the user
interface
▶ Observe the installation instructions of the heat source.
6 720 812 361-14.2O
1.
2.
6 720 812 361-15.2O
6 720 812 361-12.2O