6 720 820 872 (2016/12)CR 400 | CW 400 | CW 800
Environment / disposal | 53
9 Environment / disposal
Environmental protection is a fundamental corporate strategy
of the Bosch Group.
The quality of our products, their efficiency and environmental
safety are all of equal importance to us and all environmental
protection legislation and regulations are strictly observed.
We use the best possible technology and materials for
protecting the environment taking into account of economic
considerations.
Packaging
We participate in the recycling programmes of the countries in
which our products are sold to ensure optimum recycling.
All of our packaging materials are environmentally friendly and
can be recycled.
Old electrical and electronic appliances
Electrical or electronic devices that are no
longer serviceable must be collected
separately and sent for environmentally
compatible recycling (in accordance with the
European Waste Electrical and Electronic
Equipment Directive).
To dispose of old electrical or electronic
devices, you should use the return and collection systems put
in place in the country concerned.
10 Commissioning report
▶ Complete the commissioning report during
commissioning. It is intended to provide information.
A61
A62
A63
A64
A65
A66
A67
A68
1081
1082
1083
1084
1085
1086
1087
1088
Two master user interfaces in
the system.
Check parameter settings at the installation
level
(In the BUS system in addition to the C 400/
C 800 user interface further user interfaces
are configured as control unit)
Register the user interface for
heating circuit 1 ... 4 (8) as master
(Configure CR 10/CR 100 as
remote control)
Hxx No system fault. For instance, service interval of heat source
elapsed.
Service required; see technical
documents for the heat source.
Fault code
Sub-code
Cause or fault description Test procedure / Cause Action
Table 25 Fault displays
__ _
Table 26 During installation enter the ID number of the user interface here.
To Next Page
Loading...
