6 720 820 872 (2016/12)CR 400 | CW 400 | CW 800
Installation | 13
3.7 Installation of a outside temperature sensor
If the user interface is used as a weather-compensated control
unit, an outside temperature sensor is required.
To correctly record the outside temperature:
▶ Observe the points represented in Fig. 12 when selecting
the correct installation location of the outside temperature
sensor.
Fig. 12 Installation location for the outside temperature sensor (for weather-compensated control with or without room
temperature influence)
1
/
2
H
(min 2m)
H
1
/
2
Y
Y
1
/
2
H
(min 2m)
H
N
S
W
E
NW
NE
SW
SE
6 720 812 360-07.1O
To Next Page
Loading...
