Bosch DCN - Camera Definition; Camera Seat Assignment

External Interface Manual en | 40
Bosch Security Systems B.V. | 2004 April | External Interface Manual
where:
DCN CAMERA x.0
Indicates the type of file and the version of DCN that produced
it. In this file type indication, the letter ‘x’ represents the major
version number of the DCN software (Version 8.0 shown in the
line above).
number of audience
monitors
Indicates how many audience monitors are present. A number
in the range 1-4 (default = 1).
movement time
Time in seconds to switch to overview camera when a camera
is changing position. A fractional number in the range 0-60 in
steps of .5.
screen line usage
A number defining how the screen lines are displayed. The
number can have the following values:
0 Use the first 16 characters from the screenline (namesfile)
as bottom text.
1 Use seattext 1 (see section 9.3.2.3) as bottom text.
2 Use the first 16 characters from the screenline as top text
and the next 16 character as bottom text.
3 Use seattext 1 as top title and seattext 2 as bottom text
(see section 9.3.2.3).
camera override
Defines the camera override mode:
0 The camera will stay at the currently speaking delegate or
chairman, until the speakers’ microphone is switched off,
even if new speakers switch on their microphones.
1 The camera will switch to a new speaker as soon as the
speakers’ microphone is switched on.
number of camera
definitions
The number of camera definitions in this file.
number of seat
assignments
The number of seat assignments in this file.
<SEP>
Indicates a separator character.
<EOL>
Indicates an end of line (carriage return (0x0D) and newline
character(0x0A)).
9.3.2.2. Camera definition
This line is repeated ‘number of camera definitions’ times:
camera number<SEP>prepositions<SEP>title<EOL>
where:
camera number
Camera number. A decimal number in the range 0 - 255
prepositions
The number of prepositions the camera supports (default =
99, -1 for a fixed camera).
title
Camera Title. A string of at most 16 characters.
9.3.2.3. Camera seat assignment
This line is repeated ‘number of seat assignments’ times:
seat number<SEP>unit ID<SEP>camera<SEP>preposition<SEP> seattext1<SEP>seattext2<EOL>
where:
seat number
The seat number of the delegate.
unit ID
The ID of the unit where seat number belongs to.
camera
Camera number. A decimal number in the range 0 - 255
preposition
Preposition number to be programmed. A decimal number in
the range 0 - 255.
seattext1
Text to display on the monitor. String of at most 16 characters.
seattext2
Text to display on the monitor. String of at most 16 characters.