Why is the microphone indicator ring flashing red on my Bosch DCN-DCS Conference System?
If the microphone indicator ring is flashing red, or the LEDs of the microphone buttons are off on two or more delegate units in your Bosch Conference System, it means that the units have the same address. Ensure each active device in the DCN system has a unique address.
Information on the manual being available as a digital PDF document with hyperlinks.
Explanation of different types of alerts (Notice, Caution, Warning) used in the manual.
Details system limits and constraints for DCN delegate units, including device capacity.
Table showing power consumption for different DCN delegate unit models.
Instructions for removing and installing microphone buttons on delegate units.
Guidance on mounting the delegate unit securely to a flat surface using screws.
Process for assigning a unique address to each delegate unit in the DCN system.
Procedure to erase the address from a delegate unit using a switch.
Configuration of internal switches for microphone sensitivity, channel restore, and headphone level reduction.
Details on operating modes like Single delegate, Chairman, and Auxiliary control.
Explanation of microphone button LED colors indicating unit status and modes.
Description of the attendance LED status and its meaning for registration.
Common problems and possible causes for delegate unit initialization and operation issues.
Instructions and cautions for cleaning the delegate units using specific cleaning agents.
Guidelines for storing delegate units in a clean and dry environment.
Information on the manual being available as a digital PDF document with hyperlinks.
Explanation of different types of alerts (Notice, Caution, Warning) used in the manual.
Details system limits and constraints for DCN delegate units, including device capacity.
Table showing power consumption for different DCN delegate unit models.
Instructions for removing and installing microphone buttons on delegate units.
Guidance on mounting the delegate unit securely to a flat surface using screws.
Process for assigning a unique address to each delegate unit in the DCN system.
Procedure to erase the address from a delegate unit using a switch.
Configuration of internal switches for microphone sensitivity, channel restore, and headphone level reduction.
Details on operating modes like Single delegate, Chairman, and Auxiliary control.
Explanation of microphone button LED colors indicating unit status and modes.
Description of the attendance LED status and its meaning for registration.
Common problems and possible causes for delegate unit initialization and operation issues.
Instructions and cautions for cleaning the delegate units using specific cleaning agents.
Guidelines for storing delegate units in a clean and dry environment.
General| Brand | Bosch |
|---|---|
| Model | DCN-DCS |
| Category | Conference System |
| Language | English |
To Next Page