DICENTIS Mechanical installation of Central Equipment | en 55
Bosch Security Systems B.V.
Hardware Installation Manual
2021.01 | V2.2 |
Power LED state Description How to solve
OFF The device has no power – Check the Ethernet connector
LEDs:
– If they are lighted, power-cycle
the Dante gateway to restart it.
– If the Ethernet LEDs are off,
the power supply is probably
broken and needs to be
exchanged.
How to install
To install the Dante gateway:
4 Connect the Dante network port in the OMN-DANTEGTW to a network port in the Dante
network.
4 Connect the OMNEO network port in the OMN-DANTEGTW to the OMNEO network.
4 Connect the mains supply.
To Next Page
Loading...
