Check the encoding interval and bit rates from profile: box and
select an encoder profile to set the associated encoding interval
for alarm recording.
Check the Export to account box to send standard H.264 files
to the target whose address is displayed.
If the target has not yet been defined, click Configure accounts
to jump to the Accounts page where the server information can
be entered.
Alarm triggers
Select the alarm type that is to trigger an alarm recording:
– Alarm input
– Analysis alarm
– Video loss
Select the Virtual alarm sensors that are to trigger a recording,
via RCP+ commands or alarm scripts, for example.
Camera Browser
Interface
Recording | en 65
Bosch Security Systems 2015.04 | v1.592 | AM18-Q0678
To Next Page
Loading...