Bosch Divar 700 Series - Page 114

114 en | Technical specifications Divar 700 Series
F.01U.246.471 | v3.4 | 2011.06 Installation and Operation manual Bosch Security Systems
Control
Connectors
RS232 Output signals according to EIA/TIA-232-F, max input
voltage ±25 V
Keyboard input Conform RS485
max signal voltage ±12 V,
supply 11 V-12.6 V at max 400 mA
Biphase Impedance 128 ohm,
max overvoltage protection ±40 V, max cable length
1.5 km
RS485 Conform RS485
max signal voltage ±12 V
Video inputs
(hybrid version only)
8 or 16 looping BNC, auto-terminating
Audio inputs
(hybrid version only)
8 or 16 RCA
Ethernet 1 or 2 RJ45 shielded, 10/100/1000 BaseT according to
IEEE802.3
Monitor BNC, Y/C, VGA D-sub
Audio outputs 4 RCA
Alarm connectors Screw terminal inputs via external PCB (supplied), cable
diameter AWG 26-16 (0.13-1.5 mm2)
Malfunction relay Screw terminal output via external adapter (supplied),
cable diameter AWG 28-16 (0.08-1.5 mm2)
Biphase Screw terminal output via external PCB (supplied), cable
diameter AWG 26-16 (0.13-1.5 mm2)
RS232 DB9 male (2)
RS485 Screw terminal output via external adapter (supplied),
cable diameter AWG 28-16 (0.08-1.5 mm2)
Keyboard input RJ11 (6-pin)
Keyboard output RJ11 (4-pin), conform RS485,
16units maximum
USB Type A connector (5)