Bosch Divar 700 Series - Network Setup

88 en | Advanced configuration Divar 700 Series
F.01U.246.471 | v3.4 | 2011.06 Installation and Operation manual Bosch Security Systems
6.9 Network
6.9.1 Setup - General
Figure 6.17 Configuration menu - Network - Setup - General
– Enter a unique DVR name to be used on the network.
–If Discovery is enabled, the unit can be automatically discovered and its IP address can
be read.
– If required, change the default HTTP port (80) to a new value.
– Remote streaming limit — Enter a value between 0 and 1000 Mbps to restrict the
network bandwidth available for streaming audio and video to all BVC workstations
combined.