6 720 643 262 (2010/05)
14 | Operation with open flap US/CA
5.2 Changing room temperatures
permanently for the heating
program
The controls have 3 temperature levels for
controlling the room temperature:
• Comfort: 70 °F (21 °C) (factory settings)
adjustment range 32 °F ... 86 °F
(0.0 °C ... 30.0 °C), however higher than
Economy
• Economy: 60 °F (15 °C) (factory settings)
adjustment range 32 °F ... 86 °F
(0.0 °C ... 30.0 °C), however higher than Frost
and lower than Comfort
• Frost: 42 °F (5 °C) (factory settings)
adjustment range 32 °F ... 86 °F
(0.0 °C ... 30.0 °C), however lower than
Economy
If you wish to change the room temperature for a
longer time, proceed as follows:
Display set temperature level
The display of the set temperature level by
turning the operating mode selector only works if
the room temperature is displayed.
B Open flap.
B If desired, press dial to change the heating
circuit.
B Turn operating mode selector t the positions
/ / one after another.
The set room temperatures are displayed.
Changing the set temperature level
B Press the menu button.
The MAIN MENU is displayed, the Vacation
menu option is marked.
Fig. 5 Vacation menu option
B Turn the dial to mark the Heating menu
option.
Fig. 6 Heating menu option
B Press the dial.
The HEATING menu is displayed, the Program
menu option is marked.
Fig. 7 Program menu option
B Turn the dial to mark the Parameter menu
option.
Turn the operating mode selector
further back to the initial position
. Only then is an automatic
change of the temperature level in a
heating program possible.
9
12
h
15
18
2124
h
3
6
6 720 643 262-38.1O
9
12
h
15
18
2124
h
3
6
6 720 643 262-09.1O
6 720 643 262-12.1O
9
12
h
15
18
21
24
h
3
6
To Next Page
Loading...
