Need help?Do you have a question about the Bosch FPE-8000-FMR and is the answer not in the manual?
General| Model | FPE-8000-FMR |
|---|---|
| Series | FPE-8000 |
| Number of control modules per loop | 127 |
| Protection Class | IP30 |
| Type | Fire Panel |
| Power Supply | 230V AC, 50Hz |
| Mounting | Wall-mounted |
| Number of loops | 8 |
| Operating Temperature | 0°C to +40°C |
Information on operating the panel controller according to regulations and its intended tasks.
Specifies the training and authorization needed for personnel to operate the panel controller.
Details about alarm messages: signals, zones, sequences, logical zones, and individual detector details.
Manual control of available evacuation zones, including activating or stopping evacuation.
Details on alarm verification, including time to investigate and manual triggering procedures.
Steps to bypass detectors that have triggered an alarm to manage system events.
Covers acknowledging messages, sequence, element groups, individual elements, signals, and resetting fault messages.
Procedures for temporarily disabling and re-enabling system elements.
Procedures for temporarily disabling and re-enabling system elements.
Displaying detailed diagnostic information about specific LSN modules and elements.
Covers routing table, consistency checks, Ethernet ports, ping commands, and remote services.
Details on connecting and diagnosing Plena and PRAESENSA/PAVIRO/Praesideo VAS systems.
Covers walktest group management, including adding/deleting elements and toggling functions.
Procedures for starting, ending, and displaying elements in walktests, and assigning them to groups.
Methods for switching the system between day and night modes.
Setting and changing the panel's physical node address for network identification.
Covers creating, adding/deleting, and renaming groups (input, output, bypass, walktest).
Managing operator access, changing passwords (global, per user, default) and user sequences.
Covers Ethernet configuration, date/time settings, and Remote Services setup for remote access.
Explains how to enter master passwords (indefinite or 24-hour) for system access and changes.
Covers remote connection setup, alerts, maintenance, and interaction via the Bosch Remote Portal.
Procedures for resetting elements, including scope selection (panel, group, network) and event types.
To Next Page