6 720 643 262 (2010/05)
Operation with open flap | 17US/CA
5.4 Selecting and adapting a heating program
At the factory, various heating programs are
preprogrammed that are appropriate for most
cases. The program A (e.g. for families) is already
activated for the heating circuit 1 and the
program D (e.g. for families) is already activated
for the heating circuit 2.
In this section you will learn how you can activate
another heating program and how you can
individualize the activated heating program.
Comfort: 70 °F (21 C) (factory settings).
Economy: 60 °F (15 C) (factory settings).
Frost: 42 °F (5 °C) (factory settings)
Program Factory settings for the program points P1 to P6
Day
Switch
point P1
Switch
point P2
Switch
point P3
Switch
point P4
Switch
point P5
and P6
Program A
and
Program D
(e.g. for
families);
factory
default:
heating circuit
1 and heating
circuit 2
Monday –
Thursday
06:00am 10:00pm – – – – – –
Friday
06:00am 11:30pm – – – – – –
Saturday
07:00am 11:30pm – – – – – –
Sunday
08:00am 10:00pm – – – – – –
Program B
and
Program E
(e.g. for
people who
work during
the day)
Monday –
Thursday
06:00am 08:00am 05:00pm 10:00pm – –
Friday
06:00am 08:00am 05:00pm 11:30pm – –
Saturday
07:00am 11:30pm – – – – – –
Sunday
08:00am 10:00pm – – – – – –
Program C
and
Program F
(e.g. for
seniors)
All days
07:00am 11:00pm – – – – – –
Tab. 5 Factory settings for the heating programs A to F
The settings for a heating program
will be explained using the example
of Program A.
To Next Page
Loading...
