|
Splitter box (Cable) | FWA 43xx / FWA 44xx | 13
Robert Bosch GmbH 1 690 326 006 2008-8-25
en
Splitter box (Cable)7.
Element7.1
Tasks7.1.1
Serial data transfer from / to PC
R
Y-Partitioning of data and power supply in 2 outlets R
Fuse protection 1,6 AT for connecting cable R
Looping of 8 V R
Looping of measuring data R
Function7.1.2
The splitter box divides the serial connection of
measuring data coming from the KP and the 8 V power
supply in 2 Neutrik connecting sockets for the connecting
cable. At the same time the 8 V for the connecting cable
is protected using fuse protection 1.6 AT.
The splitter box is always connected to power supply R
The device protection with 2 x 3.15 AT is found in R
the splitter box.
A looping of 240 V AC is made for switch-able
R
multiple sockets.
Configuration of front sideFig. 8:
Delay fuse for 8 V DC 1.6 A
Configuration on back sideFig. 9:
1 Input multiple socket with fuse carrier 2 x 3,15 AT
2 Outlet multiple socket
Configuration of left sideFig. 10:
Connection of input splitter box
from PC/ Communication processor (KP)
Configuration of right sideFig. 11:
Two connection of outlet splitter box
To Next Page
Loading...
