1 690 326 006 2008-8-25| Robert Bosch GmbH
en 54 | FWA 43xx / 44xx | Operating System-Software
PropertiesFig. 27:
This entry displays the number of the TCP/IP-Port, i
via which the connection to the main program is
established.
The number is given during installation and is same
i
in case of all Windows axle measuring programs.
About
Displays a program info with the version number and
i
date of creation.
License server14.11.5
License serverFig. 28:
Tasks
Server - Provision of serial number.
R
Separate Program module R
Server for main program R
Function
The license server is a separate program module and
provides the main program as server. It provides the
serial number of the wheel alignment gauge. This
serial number is provided in the dongle. The dongle is
inserted in the parallel port LPT1. The dongle shall be
accessed by the license server via a driver.
The license server must always be started before the
i
main program.
The main program asks for the serial number of the
R
license server while starting the program and while
clicking the C key.
If the serial number is not provided, then you will
R
receive an error message. The target databank shall
be closed and a verification is possible only in demo
mode.
Path/program files
C:\<program files>\FWA-CCD\Licence
R
Licence.exe R
Program start
Autostart-Group
R
To Next Page
Loading...
