13
Getting To Know Your Miter Saw
46 514748
13 41 40
30
31
44
43
34
35
42
36
38
49
39
45
12. Miter Lock Knob – The miter lock knob locks the miter
saw table at any desired miter angle.
13. Miter Detent Lever – The lever releases the table from
the detent.
14. Bevel Lock Lever – The front-positioned bevel lock
lever locks the head assembly at the desired bevel
angle.
15. Miter Scale/Miter Pointer – The pointer rotates with
the table and blade. It points to the miter scale to indi-
cate the angle setting before a cut is made.
16. Miter Detent Plate – The position of the plate can be
adjusted to set the accuracy of its detent locations.
17. Miter Detents – There are ten (10) miter detent slots
for fast and accurate miter cuts of common miter
angles.
18. Table – Provides workpiece support, rotates for
desired miter cuts and rotates the head assembly. The
front extended part of the table is called the miter arm.
19. Base – Provides working surface to support work-
piece.
20. Tool Mounting Pads – The four corners of the saw
provide areas to clamp, bolt or nail the saw to a flat
work surface.
21. Base Extension Clamping Levers – Lock the base
extensions at the desired positions.
To Next Page
Loading...
