26/68 Installation
Bosch Rexroth Mellansel AB, Installation and maintenance manual , Hägglunds CB, RE 15302-WA/05.2019
Fig. 15: Mounting single ended torque arm TC A 0840 to TC A 1120 for CB 560 to CB 1120
Fig. 16: Mounting double ended torque arm DTCB 0400 to DTCB 1120 for CB 280 to CB 1120
Torque arm Motor type Screw dimension
Number of
screws
Tightening torque
Nm lbf·ft
TC A 0400,
DTCB 0400
CB 280/400 M20x180/300 10.9 34 540 400
TC A 0840
DTCB 1120
CB 560/840
M24x80 10.9 41 900 660
TC A 1120
DTCB 1120
CB 1120
Notice! Use torque wrench and oiled screws!
Table 7: Screw dimensions
1
1
DD00100405
DD00100583
To Next Page
Loading...
