4/68
Bosch Rexroth Mellansel AB, Installation and maintenance manual , Hägglunds CB, RE 15302-WA/05.2019
7.4 Product installation 25
7.4.1 Fitting the torque arm on the motor 25
7.4.2 Single ended torque arm installation 27
7.4.3 Double ended torque arm installation 32
7.4.4 Mounting of motor and coupling adapter 37
7.4.5 Draining and venting the motor 48
7.4.6 Flushing 50
7.4.7 Hydraulic connections 51
7.4.8 Direction of rotation of motor shaft 52
8 Commissioning 54
8.1 Commissioning 54
8.1.1 Oil lling 54
8.1.2 Start of the hydraulic supply 55
8.2 Re-commisioning after standstill 55
9 Operation 55
10 Maintenance and repair 56
10.1 Cleaning and care 56
10.2 Inspections 56
10.3 Maintenance plan 58
10.4 Maintenance 59
10.4.1 Filter maintenance 59
10.4.2 Oil maintenance 59
10.5 Repair 60
10.6 Spare parts 60
11 Removal and replacement 60
11.1 Required tools 60
11.2 Preparing for removal 60
11.3 Removing motor and coupling adapter 61
11.4 Preparing the components for storage or further use 64
12 Disposal 65
12.1 Environmental protection 65
13 Extension and conversion 65
14 Troubleshooting 66
15 Technical data 67
15.1 Technical data, Hägglunds CB 67
15.1.1 Hydraulic uids 67
To Next Page
Loading...
