Bosch IMSA Prototype Classes Scrutineering System User Manual

9 | Starting up
30/148 DDU 9 Bosch Motorsport
6. Perform these steps to activate other features you purchased.
7. Switch the car’s ignition off and on again to cycle the power of DDU 9.
9.3 First display configuration (Quick Start)
This chapter explains the configuration of a display element showing the battery voltage.
See chapter Display element configuration for a detailed instruction to configure display
elements.
1. Click on ‘+’ to expand the DDU 9 project tree.
2. Click on ‘+’ to expand ‘Display’.
3. Double-click on ‘New Page’, or click on the ‘Display’ tab.
RaceCon changes to the page ‘Display’ to open the DDU 9 display configuration area.
Click '+'
Double-click
'New Page'
4. Drag any display element from the Toolbox and drop it on the display page.
The status signal in the upper left corner switches from green to orange, because the
configuration in the tool differs from the configuration of the device.

Bosch IMSA Prototype Classes Scrutineering System Specifications

General

Brand	Bosch
Model	IMSA Prototype Classes Scrutineering System
Category	Monitor
Language	English