Bosch KM3211WH - Filling up the Bath

14
On this Display Operation Description
1
2
Press the
ON/OFF
button
to turn it “On”.
3
Filling Up the Bath
When using RCM3211
1. Insert the bathplug into the plughole.
Turn on hot water.
(Display example)
Check
When the bath is full,
turn off the taps.
* Please set to the
highest temperature
when using
thermostat controlled
water mixing valves.
WARNING
Check the bathwater temperature with your hand be-
fore getting into the bath.
To prevent scalding.
Preparation
* The
ON/OFF
is lit.
* When Circulation is on, the
symbol blinks and circulation mode
starts automatically. ( P15)