38
Item
Gas
Consumption
Hot Water Capacity
Capacity Range
Temperature Settings
Default Temperature Options
NG
LP
25°C Rise 32 L/min.
3 - 32 L/min.
37 - 48, 50, 55, 60, 65, 70, 75, 80°C (Bridge 83°C)
40, 50, 60, 83°C
Maximum Performance
250 MJ/h
250 MJ/h
Minimum Performance
20 MJ/h
18 MJ/h
Specification
KM3211WH
Indoor or Outdoor, Wall Hanging
Power Vented
Direct Ignition
200 kPa
3.5 L/min.
61.5 cm(Height) x 46.4 cm(Width) x 24 cm(Depth)
29 kg
1.1 Litre
3/4"
3/4"
3/4"
240 VAC (50Hz)
NG:100W
LP:115W
Freeze Prevention 115W
Zincified Steel Plate/Polyester Coating
Stainless Steel
Copper Sheeting, Copper Tubing
Flame Rod, Thermal Fuse, Pressure Relief Valve,
Lightning Protection Device (ZNR),
Electric Leakage Prevention Device, Overheat
Prevention Device, Freezing Prevention Device,
Fan Rotation Detector
Remote Controller, Anchoring Screws
Specifications
Specifications
• Specifications may be changed without prior notice.
• The capacity may differ slightly, depending on the water
pressure, water supply, piping conditions, and water temperature.
Performance
Item
Model Name
Type
Ignition
Minimum Pressure for Maximum flow
Minimum Flow Rate
Dimensions
Weight
Water Holding Capacity
Accessories
Installation
Air Supply/Exhaust
Connection Sizes
Power Supply
Materials
Water Inlet
Hot Water Outlet
Gas Inlet
Supply
Consumption
Casing
Flue Collar
Heat Exchanger
Safety Devices
58°C Rise 13 L/min.
KM3211WHQ
32 kg
Hot Water Return
–1/2"
NG:135W
LP:150W
Freeze Prevention 140W
To Next Page
