24
Priority
Burner on
1
2
Use the
buttons to adjust the
temperature.
(Eg.: 40°C)
Press the
button to turn it
“On”.
* Hot water supply temperature
is displayed.
Priority
Burner on
Priority
Burner on
Setting Hot Water Temperture
When using RCS3211
On this Display Operation Description
While the shower is being used, no one other than the user
should change the temperature, the power switch must not be
turned “off”, when using sub remote controller.
WARNING
This is to prevent scalding if the temperature rises. Conversely, if the temperature reduces or the
power switch is turned “off”, the user may be upset when the water suddenly becomes much colder.
To Next Page
