27
The water temperature will be set at 60°C (fixed). Please mix in some cold water through the
water mixing valves.
Contact your installer if you wish to fix the temperature at 42°C, 45°C, or 75°C)
(such as to connect a dishwasher, etc.).
If the temperature is set at 75°C, use thermostat-controlled water mixing valves
to prevent scalding when using other taps.
1
2
Temperature
adjustment for
hot water supply
No remote controller case
3
Turn off the hot water tap after use.
WARNING
Whenever using hot water, such as when using the
shower, first test the hot water temperature by hand.
To prevent scalding.
Operation Description
Turn on hot water.
Running Hot Water
To Next Page
