What to do if my Bosch Heat Pump compressor isn't running and the fan is on, but I suspect low refrigerant?
If your Bosch Heat Pump's compressor isn't running but the fan is, it could be due to a low-pressure fault caused by low refrigerant. Check the refrigerant pressure with a gauge set.
How to reduce objectionable noise levels from my Bosch Heat Pump?
If you're experiencing objectionable noise levels from your Bosch Heat Pump, ensure the duct work and grilles are properly sized for unit air flow. If the fan speed setting is too high, consult the blower performance table and reduce fan speed if possible. To address structure borne noise, mount the unit on a vibration pad. Also, install the unit in accordance with the provided instructions and adjust the unit location to prevent it from touching the structure.
Explains symbols used for warnings, cautions, and important information.
Highlights essential safety rules for installation, operation, and maintenance.
Covers initial site assessment, unit inspection, and location selection before installation.
Addresses common issues like no compressor operation, fan faults, and related error codes.
Covers troubleshooting for temperature, humidity, and noise issues.
General| Voltage | 208/230V |
|---|---|
| Refrigerant | R410A |
| EER Cooling | 12.0 |
| Cooling Capacity | 18000 BTU/h |
| Heating Capacity | 18000 BTU/h |
To Next Page
