Bosch MAP 5000 - Page 54

To Next Page

To Previous Page

54 en | Connections MAP 5000

2018.08 | 23 | F.01U.168.332 Installation manual Bosch Sicherheitssysteme GmbH

Installing the enclosure lockset

4 Connect the long grounding cable (P/N F01U074762) to the enclosure door.

Connecting the grounding cable to the enclosure door

Main Page

Table of Contents3
Introduction5
Short Information5
Listings and Approvals5
Battery Handling5
Installation Considerations5
Planning the System6
Planning the System with IPP-MAP0005 Power Supply7
Planning the System with ICP-MAP0012 CAN Splitter Module11
System Overview12
Installation15
Removing the Enclosure Knockouts15
Installing the Tamper Switch Rail16
Mounting the Enclosure17
Checking the AC Connection19
Installing the Power Supply and Power Supply Accessories19
Installing the TAE Box23
Installing the Accessory Mounting Plate24
Installing the 12 V Converter26
Installing the Fuse Plate (SIV)27
Installing the at 2000 Communicator28
Installing the Hinged Mounting Plate33
Mounting the Main Panel36
Installing the ICP-COM-IF Relay Module37
Installing and Connecting the ITS-MAP0008 Wireless Modem38
Antennas40
Connections41
Connecting the Data Bus41
Internal / External Data Bus43
Topology of the External Data Bus43
Splitting the External Data Bus with a CAN Splitter Module44
Connecting the Control Center44
Connecting the Main Panel45
Connecting the Power Supply46
Connecting the LSN Gateway47
Optional Connections49
Installing and Connecting the Tamper Switch51
Installing the ICP-MAP0060 Enclosure Lockset53
Installing the Control Center55
Final Power Connections55
IP Interface56
Initial Set-Up and Programming57
Initial Set-Up57
Programming57
Help for the Programming Software58
Standard-Compliant Programming58
Panel Software58
Checking the Software Version58
Software Updates59
Manufacturer Authorization59
Completing the Installation59
Point Types and Point Evaluation59
Output Functions60
Programmable Output Signals60
Sirens and Communicator in Accordance with EN50131 Grade 362
Enclosure Options64
ICP-MAP0115 Power Enclosure64
Rack Mount Option for ICP-MAP0120 Expansion Enclosure65
Maintenance and Service66
General Information66
Installer Button66
Technical Specifications68
Appendices71
Requirements in Accordance with Vds Class C71
Selecting the Default Setting71
Power Supply for Areas71
Control Centers71
Connection to a Management System71
Printer Connection71
Access Levels71
Requirements in Accordance with en 50131 Grade 374
Selecting the Default Setting74
Connectable Peripherals74
Arming / Disarming Without Entry / Exit Delay74
Arming / Disarming with Entry / Exit Delay74
Arming with Automatic Bypass76
Automatic Arming / Disarming76
Alarm Output Via Siren and Communicator77
Connection to a Management System77
Printer Connection77
Access Levels77
Additional Functions of the Main Panel80
Requirements in Accordance with SES80
Selecting the Default Setting80
Automatic Arming / Disarming81
Areas with Blocking Time81
Access Levels81
Tamper Surveillance of the Main Panel84
Alarm Reporting85
History Log86

Bosch MAP 5000 - Page 54

Table of Contents

Related product manuals