MAP 5000 Initial set-up and programming | en 63
Bosch Sicherheitssysteme GmbH Installation manual 2018.08 | 23 | F.01U.168.332
– One communicator (class 4)
Connections R1 – R7 on ICP-COM-IF
Variant B (ICP-COM-IF required)
– One self-powered siren
Outputs 10 / 11 or 13 / 14 on ICP-MAP5000 main panel
– One communicator class 4
Outputs R1 – R7 on ICP-COM-IF
Variant C (ICP-COM-IF required)
– One communicator class 4 (main communicator)
Outputs R1 – R7 on ICP-COM-IF
– One communicator class 3 (additional communicator)
Outputs R1 – R7 on ICP-COM-IF or other outputs on panel
Notice!
Both communicators may be connected to the same outputs.
Variant D (ICP-COM-IF required)
– One communicator class 5
Outputs R1 – R7 on ICP-COM-IF
To Next Page
Loading...
