MicroDome Camera 200 Series Troubleshooting | en 21
Bosch Security Systems Installation Manual AR18-10-B012 | v1.55 | 2012.09
5 Troubleshooting
5.1 Resolving problems
The following table is intended to help identify the causes of
malfunctions and correct them when possible.
Malfunction Possible causes Solution
No image
transmission to
remote location.
Faulty cable connections. Check all cables, plugs,
contacts and
connections.
No connection
established, no
image transmission.
The unit's configuration. Check all configuration
parameters.
Faulty installation. Check all cables, plugs,
contacts and
connections.
To Next Page
Loading...
