FLEXIDOME HD VR Installation | en 25
Bosch Security Systems Installation Manual AM18-Q0637 | v1.0 | 2012.12
5.5 Controls
1. Reset button Restores the default IP address or
restores a previous version of the
firmware if uploading a new version
fails. With the power on, use a small
pointed object to press and hold the
reset button for more than 10
seconds to restore the factory
defaults.
2. Menu button Use this button to start the field-of -
view installation wizard.
3. MicroSD card slot Insert a microSD card into the slot.
4. Service video
output
2.5 mm jack provides a CVBS signal
(for installation purposes only)
To Next Page
Loading...
