FlexiDome IP Configuration via the browser | en 53
Bosch Security Systems Operating Instructions V 1.0 | 2006.12
7.5.1 ALC
Video level
Adjust the video output level (-15 to 0 to +15).
Shutter
– AES (auto-shutter) - the camera automatically sets the
optimum shutter speed for the lens. The camera tries to
maintain the selected shutter speed (1/60 [1/50], 1/100,
1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10K) as
long as the light level of the scene permits.
– FL - flickerless mode avoids interference from light
sources.
Gain
When the Gain mode is On, the camera automatically sets the
gain to the lowest possible value needed to maintain a good
picture.
NightSense™
Nightsense™ extends the low-light performance of the camera.
– In AUTO mode, the camera automatically inches to mono-
chrome in low-light conditions.
– In FORCED mode, the camera remains in high-sensitivity
monochrome operation.
To Next Page
Loading...
