FlexiDome IP Connections between video servers | en 95
Bosch Security Systems Operating Instructions V 1.0 | 2006.12
8.0.4 Connecting with a Web browser
Various requirements must be met in order to operate using a
Web program.
1. Use the Web browser to connect to the receiver. Its home
page is displayed.
Under Video sources on the page Connections, select the cam-
era. A JPEG snapshot of the selected video source is displayed
on the page.
2. Click an MPEG-4 connection to begin displaying the video
images on the connected monitor.
8.0.5 Closing the connection
The connection may be closed using a Web browser.
1. Use the Web browser to connect to the receiver. Its home
page is displayed.
2. In the title bar of the Monitor window on the page Connec-
tions, click on the X icon to end the display of the video
images on the connected monitor.
i
NOTICE!
Transmitter and receiver must be located in the same subnet to
establish a hardware connection with a Web browser.
To Next Page
Loading...
