FlexiDome IP Configuration via the browser | en 67
Bosch Security Systems Operating Instructions V 1.0 | 2006.12
1. Click one of the tabs to edit the corresponding profile.
2. Click Default to return all settings to their defaults.
3. Click Copy settings if you want to copy the currently visi-
ble settings to another profile. A dialog appears and you
can select the target profile for the copied settings.
4. Click Set in each profile tab that you want saved.
Standard profile
Select the encoder profile to use for continual recording.
Encoder
Select which data stream to record here.
i
NOTICE!
The recording profile can deviate from the standard setting
Active profile and is only used during an active recording.
To Next Page
Loading...
