Bosch PLE-SDT - Muting the Output Sound; Stereo; Mono Output Sound

26 en | Operation Plena Easy Line SD Tuner BGM source
PLE-SDT_OM | V1.0 | 2012.02 Installation and Operation manual Bosch Security Systems B.V.
8.3.7 Stereo / mono output sound
To switch between stereo and mono audio output sound (output 29) of the FM tuner:
1. Press the button ST/MONO (37) of the remote control:
– The LCD (16) upper line will show "STEREO" when stereo is set or "MONO" when
mono is set.
2. Press the button ST/MONO (37) again to switch between mono and stereo.
8.3.8 Muting the output sound
To mute the audio output sound (output: 29) of the FM tuner:
1. Press the button (4) of the remote control:
– The LCD lower line will show MUTE flashing continuously when the mute function is
activated.
2. To reactivate the sound, press the button (4) once again.
NOTICE!
Sometimes a stereo FM radio frequency produce unwanted output noise. In that case, get a
good public antenna connection or set the FM tuner in the mono mode.