Plena Easy Line SD Tuner BGM source Safety | en 5
Bosch Security Systems B.V. Installation and Operation manual PLE-SDT_OM | V1.0 | 2012.02
1Safety
Prior to installing or operating this product, always read the Important Safety Instructions
which are available as a separate document (F.01U.120.759). These instructions are supplied
together with all equipment that can be connected to the mains supply.
Safety precautions
The PLE-SDT Plena Easy Line SD Tuner BGM source is designed to be connected to the 115/
230 Vac public distribution network.
To avoid any risk of electric shock, all interventions must be carried out with disconnected
mains supply.
Interventions with the equipment switched on are authorized only when it is impossible to
switch the equipment off. The operation must only be performed by qualified personnel.
To Next Page
Loading...
