Power amplifier General installation procedures | en 11
Bosch Security Systems B.V.
Installation manual
2023-01 | V02 | F.01U.402.247
4 General installation procedures
Before starting installation, ensure the following:
– You make use of manufacturer specified installation materials.
– No liquids can spill into or on the products.
– Installation is in a clean environment free of dust.
– The ventilation airflow of the 19" units is not obstructed.
– There is a mains power outlet of sufficient rating close to the intended location of the
products.
– Sufficient free space and access at the rear of the 19" units for connectors and wiring.
4.1 Unpacking
The products should be unpacked and handled with care. If an item appears to be damaged,
notify the shipper immediately. If any items are missing, notify your Bosch representative.
The original packaging is the safest container in which to transport products and can also be
used to return products for service, if necessary.
4.2 Parts included
Quantity Component
1 Power amplifier
1 Mains cord
1 Euroblock remote connector 5‑pole
2 Euroblock input connector 6‑pole
2 Euroblock output connector 4‑pole
4 Rubber feet
2 19"‑rack mounting brackets (pre‑mounted)
1 Quick Installation Guide
1 Safety information
To Next Page
Loading...
